200T/D Maize Flakes Making Machine

Maize Flaking Plant Corn Processing Equipment Hydraulic Flaking Machine

detail introduce:

It adopts high-nickel-chromium-molybdenum alloy centrifugal roll from China First Heavy Industries with hardness of HS75º-78ºand thickness 30mm, which ensures the strength of roller’s inner support. Our company has achieved patented technology for shaft assembly process, the roller body is with a filling hole for adding heat conduction oil, which promise uniform heat recycling and the roll body will not deform. And the rolled flake is uniform, the roller service life is prolonged to be twice.

Features:

1. Square bearing seats for rollers can move along the smooth rail, getting the two rollers engaged or disengaged, which is controlled by energy-saving PLC oil pump station. Equipped with SKF bearings, SEW geared motors, Siemens high-efficiency energy-saving motors.
2. Its swaying is controlled by oil piston, fulfill the purposes of blocking or discharging materials; Slight adjusting depends on the calibration, which give two advantages: one is that the oil piston is strong enough to block materials efficiently, and the other is that referring to the calibration, hand wheel can give precise slight adjustment, very easily.

3. Compressed air is brought in to blow and clean the parts intermittently where materials accumulated. According to the quantity of materials accumulated, the pneumatic valve can be adjusted properly to keep the machine clean inside.

4. It is casted and can keep working for several years without wearing out; operators can move it up, down, left and right freely outside the machine, ensuring no leakage of small particles.

4. The machine equipped with double motors which run the fixed roller and the mobile roller by means of a narrow V type belt, twice more efficient than traditional C type belt, ensuring it working stably; The pulley is standard WOT type, equipped with a taper sleeve for fast replacement, easy for installation and matainance; Beside, each set of drive transmission is equipped with a tension device, a fully enclosed protective cover and a warning sign.

Specification:

Capacity: 200T/D

Power of main motor: 45KW/1pc ×2

Roller size: Φ711×1500(mm)

Speed of roller: 310r/min

Flake thickness: 1.5-2mm

Power of main motor for feeding roller: 1.1KW

Speed of feeding roller: Stepless speed chang

Power of main motor for oil pump: 2.2KW

Pressure of oil pumping system: 3.0～4.0Mpa(Depending on the output)

Size: 2700×2500×2000(mm)(length × width × height)

Weight: Nearly 12.5 ton in total.