|Material:||Corn||Power:||11-45 Kw X 2|
corn flakes processing line,
maize flake machinery
High Capacity Corn Flake Machine CE Approved Hydraulic Flaking Machine
It adopts high-nickel-chromium-molybdenum alloy centrifugal roll from China First Heavy Industries with hardness of HS75º-78ºand thickness 30mm, which ensures the strength of roller’s inner support. Our company has achieved patented technology for shaft assembly process, the roller body is with a filling hole for adding heat conduction oil, which promise uniform heat recycling and the roll body will not deform. And the rolled flake is uniform, the roller service life is prolonged to be twice.
1. Its swaying is controlled by oil piston, fulfill the purposes of blocking or discharging materials; Slight adjusting depends on the calibration, which give two advantages: one is that the oil piston is strong enough to block materials efficiently, and the other is that referring to the calibration, hand wheel can give precise slight adjustment, very easily.
2. Square bearing seats for rollers can move along the smooth rail, getting the two rollers engaged or disengaged, which is controlled by energy-saving PLC oil pump station. Equipped with SKF bearings, SEW geared motors, Siemens high-efficiency energy-saving motors.
3. Equipped with permanent magnetic bar to prevent damage to the roll from iron in the material;
The magnetic bar can be set outside the feeder when it needs cleaning, this way makes cleaning easy and the iron scrap will not fall inside machine.
4. The location limit control is designed to avoid collision of the two rollers; The specially designed big and small hand wheels working together fulfills this purpose. With this design, the equipment is easier to operate, controlling is more precise and flaking is more stable.
5. Compressed air is brought in to blow and clean the parts intermittently where materials accumulated. According to the quantity of materials accumulated, the pneumatic valve can be adjusted properly to keep the machine clean inside.
6. The scraper is fixed on the base frame by means of spline shaft, and operates can adjust it outside the machine, very convenient; A location limit is designed for the scraper, and after scraper reaching to the right location, it barely wears out any more, which lengthen its work life largely; It can be pulled out along smooth rail when it needs replacing, quite simply.
Power of main motor: 18.5KW/1pc ×2
Power of main motor for oil pump: 2.2KW
Power of main motor for feeding roller: 0.55KW
Roller size: Φ600×1000(mm)
Speed of roller: 310r/min
Flake thickness: 0.25～0.35mm
Speed of feeding roller: Stepless speed chang
Pressure of oil pumping system: 3.0～4.0Mpa(Depending on the output)
Size: 1953×1669(3078 for counting the motors)×1394(mm)(length × width × height)
Weight: Nearly 7 ton in total.
Contact Person: Cindy
Tel: +86 13213180253