200MT to 500MT Per Day Compact Flour Milling Plant

Our large scale flour milling equipment has a production capacity of 200-600 tons/day. These machines are mainly installed in reinforced concrete buildings or steel structural plants, which are generally 5-to 6-storey high (including the wheat silo, flour storage house, and flour blending house).

Our flour milling solutions are mainly designed according to the American wheat and Australian white hard wheat. When milling a single kind of wheat, the flour extraction rate is 76-79%, while the ash content is 0.54-0.62%. If two kinds of flour are produced, the flour extraction rate and ash content will be 45-50% and 0.42-0.54% for the F1 and 25-28% and 0.62-0.65% for the F2. Specifically, the calculation is based on the basis of dry matter. The power consumption for the production of one ton of flour is no more than 65KWh on normal conditions.

The PLC system is adopted for controlling all the machines. Once a fault is detected, the PLC intelligent system will respond accordingly according to the diagnosis to minimize influence of the problems. The responds may include sound-light alarm, material feeding cutting-off, and so on.

We can install all the system for you according to the equipment list. But we need customers to provide water, three phase power, crane, forklift, oxyacetylene welding machine, electric welding machine for the installation project.

We will send 2-3 installation and electric engineers to help with the system installation, equipment test run, and operational training. During all the system's service life, we can provide technical support.