Payment & Shipping Terms:
High Quality Maize Corn Plant Processing Machine For Flaking
It adopts high-nickel-chromium-molybdenum alloy centrifugal roll from China First Heavy Industries with hardness of HS75º-78ºand thickness 30mm, which ensures the strength of roller’s inner support. Our company has achieved patented technology for shaft assembly process, the roller body is with a filling hole for adding heat conduction oil, which promise uniform heat recycling and the roll body will not deform. And the rolled flake is uniform, the roller service life is prolonged to be twice.
1. It is casted and can keep working for several years without wearing out; operators can move it up, down, left and right freely outside the machine, ensuring no leakage of small particles.
2. The machine equipped with double motors which run the fixed roller and the mobile roller by means of a narrow V type belt, twice more efficient than traditional C type belt, ensuring it working stably; The pulley is standard WOT type, equipped with a taper sleeve for fast replacement, easy for installation and matainance; Beside, each set of drive transmission is equipped with a tension device, a fully enclosed protective cover and a warning sign.
3. The pumping station complete with PLC control system works in an intermittent way. It works like this, when the system pressure rises to the upper limit, the oil pump stops automatically to keep a proper pressure; and when the pressure falls under the lower limit, the oil pump automatically starts and increases the pressure back to normal in 2 or 4 seconds. Comparing to the traditional pump station, the intermittent type has some advantages: keeping the proper pressure for a much longer time, saving energy obviously; the real working time of the pump is quite short, so it has a longer work life than traditional type; Working in the intermittent way can keep case and oil temperature almost constant without rising too high, so the system is more stable than the traditional type;
4. The control system is equipped with high quality imported PLC, high material level and low material level monitoring device; There are two models, manual and automatic, on the control panel;Under manual model, every action can be controlled separately; Under automatic model, main motor and oil pump motor are started first; when the detector for the high material level send back a signal and the pressure of oil pumping system reaches to the proper pressure, the two rollers get engaged automatically, then the motor driving the feeding roller start, and in the meantime, the blocking gate opens, the machine coming to working state; Several seconds after the low material level sending a signal, the blocking gate and the motor for feeding roller stop automatically, in the meantime, two working rollers get disengaged, the machine coming to stop.
Power of main motor: 18.5KW/1pc ×2
Roller size: Φ600×1000(mm)
Speed of roller: 310r/min
Flake thickness: 0.25～0.35mm
Power of main motor for feeding roller: 0.55KW
Speed of feeding roller: Stepless speed chang
Power of main motor for oil pump: 2.2KW
Pressure of oil pumping system: 3.0～4.0Mpa(Depending on the output)
Size: 1953×1669(3078 for counting the motors)×1394(mm)(length × width × height)
Weight: Nearly 7 ton in total.
Contact Person: Cathy