|Name:||No Pollution Corn Roller Mill 100D/D Hydraulic Flaking Machine||Raw Material:||Maize Corn|
|Application:||Flaking||Type:||Grain Processing Equipment|
|Capacity:||80-100T/D||Final Products:||Corn Flake|
corn flakes processing line,
corn flakes maker machine
No Pollution Corn Roller Mill 100D/D Hydraulic Flaking Machine
It adopts high-nickel-chromium-molybdenum alloy centrifugal roll from China First Heavy Industries with hardness of HS75º-78ºand thickness 30mm, which ensures the strength of roller’s inner support. Our company has achieved patented technology for shaft assembly process, the roller body is with a filling hole for adding heat conduction oil, which promise uniform heat recycling and the roll body will not deform. And the rolled flake is uniform, the roller service life is prolonged to be twice.
1. Its swaying is controlled by oil piston, fulfill the purposes of blocking or discharging materials; Slight adjusting depends on the calibration, which give two advantages: one is that the oil piston is strong enough to block materials efficiently, and the other is that referring to the calibration, hand wheel can give precise slight adjustment, very easily.
2. Equipped with permanent magnetic bar to prevent damage to the roll from iron in the material;
The magnetic bar can be set outside the feeder when it needs cleaning, this way makes cleaning easy and the iron scrap will not fall inside machine.
3. Compressed air is brought in to blow and clean the parts intermittently where materials accumulated. According to the quantity of materials accumulated, the pneumatic valve can be adjusted properly to keep the machine clean inside.
4. The scraper is fixed on the base frame by means of spline shaft, and operates can adjust it outside the machine, very convenient; A location limit is designed for the scraper, and after scraper reaching to the right location, it barely wears out any more, which lengthen its work life largely; It can be pulled out along smooth rail when it needs replacing, quite simply.
5. It is casted and can keep working for several years without wearing out; operators can move it up, down, left and right freely outside the machine, ensuring no leakage of small particles.
Power of main motor: 22KW/1pc ×2
Roller size: Φ600×1000(mm)
Speed of roller: 310r/min
Flake thickness: 1.5-2mm
Power of main motor for feeding roller: 1.1KW
Speed of feeding roller: Stepless speed chang
Power of main motor for oil pump: 2.2KW
Pressure of oil pumping system: 3.0～4.0Mpa(Depending on the output)
Size: 2150×1640×1800(mm)(length × width × height)
Weight: Nearly 5 ton in total.
Contact Person: Cindy
Tel: +86 13213180253